Threaded Rod Threaded Bolt Carbon Steel Zinc Plated

THREADED ROD
Items: Rods, Threaded rods, All threaded rods; Threaded Bolts
Materials: Carbon steel, Stainless steel( A2&A4), Cooper, Alloy steel
Sizes: 1/4", 5/16", 3/8", 1/2", 3/4", 6mm, 8mm, 10mm, 12mm, 14mm
Length: 1meter, 2meters, 2.4meters, 3meters, 5.8meters, 6meters.
Grades: 4.6, 4.8, 8.8, 10.9, A193 B7.
Finish: Plain, Zinc Plated, White Zinc Plated, Black, Yellow Zinc Plated, H.D.G and Dacormet
Packing: Bundle Packing and then into export pallets or as per required.

  THREADED ROD
Items: Rods, Threaded rods, All threaded rods; Threaded Bolts
Materials: Carbon steel, Stainless steel( A2&A4), Cooper, Alloy steel
Sizes: 1/4", 5/16", 3/8", 1/2", 3/4", 6mm, 8mm, 10mm, 12mm, 14mm
Length: 1meter, 2meters, 2.4meters, 3meters, 5.8meters, 6meters.
Grades: 4.6, 4.8, 8.8, 10.9, A193 B7.
Finish: Plain, Zinc Plated, White Zinc Plated, Black, Yellow Zinc Plated, H.D.G and Dacormet
Packing: Bundle Packing and then into export pallets or as per required.

 

K11 series 3-jaw self-centering chucks adapt plane threaded structure through the gear,scroll to make jaws move at same time for achieving self-centering of the workpiece .

I: Classification

According to the connecting type with spindle into the short-cylinder chucks and short-taper chucks.

1.The short-cylinder chucks connected with the machine spindle through adapter plate .

2.The short-taper chucks mounted to the machine spindle directly.They are of the feartures of short overhung,fine rigidity,high centering accuracy and easy installing etc.

According to the chuck body material into Nodular cast iron(QT) and Steel (G)

1.Nodular cast iron(QT) chucks precision machine have high speed,large gripping force.

2.Steel (G) chucks have high speed,high clamping force,long using life eta.

II:Model Instruction:

K11(1)(2)/(3)(4)

(1) is  chuck size,chuck diameter D+/-5%

(2) is chuck matched with jaw type

One -piece jaw:

Chuck matched with one -piece jaw which include a set of internal jaw and set of external ones,this item without marked in type

Two-piece jaw

Chuck matched with traditional two-piece jaw,type is C

Chuck matched with two-piece jaw that conform to ISO3442 standard type is A

Chuck matched with two-piece jaw that conform to ISO3442 standard but the base jaw can't clamp type is D

(3) is Mounting type of short-taper chuck matched with machine spindle and machine spindle nose No.

Mounting type of short-taper chuck matched with machine spindle are form A1,A2,C,D, and machine spindle nose Numbers are 3,4,5,6,8,11,15,20.

FormA1:mounting Use inner tapped holes or Use Outer Tapped Holes

Form A2:Use adapter plate

Form C: Mounting with studs and locknuts

Form D:Mounting with rod for camlocks

****SHORT-CYLINDRICAL center mounting chucks with marked this item .

(4) is Chuck body material :Nodular cast iron is (QT) and Steel is  (G)

III:Main model :

1.K11(),K11()C,K11()A,K11()D,K11()(QT),K11()(G) ,THREE-JAW SELF-CENTERING CHUCKS

2.K11()/(A,C,D,) , K11()/(A,C,D,)(QT) ,K11A,C,D)()/(A)(G) SHORT-TAPER THREE-JAW SELF-CENTERING CHUCKS

K11 Three Jaw Self Centering Chucks

Three Jaw Selfcentering Chucks,Short Taper 3Jaws Selfcentering Chucks,K11 Series 3Jaws Selfcentring Chuck,Three Jaw Chucks

NingXia DaHe Machine Tool (Group) Imp And Exp Co.,Ltd , http://www.nxdhjcmachine.com