Caused Single-bridge Flat Truck Engine High Temperature Cause
After entering the hot summer heat, it will make the burden on the cooling system of the single-bridge flatbed truck heavy. Because the usual maintenance is neglected, it will cause the failure of the single-bridge flatbed truck in the high-temperature summer. The normal cooling system of the truck is the key to ensuring the normal operation of the engine. What are the reasons for the high temperature of the single-bridge flat truck?
1. Some drivers may still use water instead of the coolant for the single-bridge flat-bed truck engine. However, those ordinary water quality are relatively easy to generate scale in the tank. Once it is around the tank, there is a scale. After that, it will directly affect the cooling of the tank. Some models have relatively high requirements for the cooling system and the coolant. Therefore, the added coolant and antifreeze must be in accordance with the manufacturer's standards and cannot be added arbitrarily. The liquid used as a coolant would otherwise cause engine damage.
2. Some models of single-bridge flat-bed truck engines are under disrepair, and then added to the normal daily use process, they will not notice the maintenance and cleaning up, and they will be covered with sludge mixture or It is sludge, and these layers of thick sludge are like adding a layer of covering to the single-bridge flat-bed truck engine. Everyone imagines that the next person's body is covered with a quilt and the temperature is between 30 and 40 degrees Celsius. What happens when the sun is exposed to the weather? If this is the case, it will lead to a significant reduction in the cooling effect of the single-bridge flatbed truck engine. Cleaning the oil on single-bridge flatbed trucks can be cleaned with special oil cleaners or gasoline. High-temperature and high-pressure steam can also be used to remove these oily dirt. The clean, single-bridge flatbed truck engine looks not only beautiful, but also has a good cooling effect on the engine that can help the vehicle.
4, part of the single-bridge flat truck driver will think that expansion tanks can not play much of a role, the main role of the expansion tank is until the coolant temperature rises and the water level rises, the tank can not fit in the cooling fluid back to In the single-bridge flat truck's expansion tank, it can effectively prevent the pressure in the tank from being too high. In the opposite case, it will add water to the tank. The expansion tank of a flatbed truck can also be called a compensation tank, which also plays an important role in the engine cooling system of the vehicle. If it is found that the expansion tank of the truck is damaged and cracked, the coolant with a higher temperature will be leaked out of the location where the expansion tank is damaged under the effect of pressure, resulting in single-bridge flat truck engine coolant. The number of single-platform flat-bed truck engines has caused high-temperature dryness due to the lack of coolant, and finally the loss caused by the engine is irretrievable.
Door Ball Locks,Bathroom Privacy Entry Door Knobs,Cylindrical Knobset Door Lock,Security Lever Knob Handle
ONLEE HARDWARE CO.,LTD , https://www.onleehardware.com