Coarse worker safety production operation procedures
1, Â Â Â Â Â Â Â Â Before starting the jaw crusher , the mechanical bearings and the screws of each part must be carefully checked for lubrication and lubrication. There is no debris between the jaw plate and the tooth plate, and there is no obstacle around the machine.
2, Â Â Â Â Â Â Â Â To drive in strict accordance with the operating procedures, all dust removal equipment must be turned on first, and then the crusher should be started under normal oil conditions, but the driving signal must be issued beforehand.
3, Â Â Â Â Â Â Â Â During the work process, it is necessary to observe the lubrication situation, the bearing, the bearing temperature, the jaw plate, the tooth plate, the spring, the screw and the transmission belt. The machine was found to have an abnormal acoustic response and immediately stopped processing.
4, Â Â Â Â Â Â Â Â Strengthen the maintenance, repair and management of equipment. Do not check the repaired rotating part by hand during operation. It must be stopped when repairs are required.
5, Â Â Â Â Â Â Â Â The original mine bin cannot be exposed to prevent the ore from directly impacting the plate feeder.
6, Â Â Â Â Â Â Â Â Crushing process should be given a uniform continuous mine, do not accumulate, avoiding iron block and explosives into the tiger population and cause an accident.
7, Â Â Â Â Â Â Â Â When the ore blocks the tiger's mouth, it must be hooked with iron rods or iron hooks. It cannot be fried with explosives.
8, Â Â Â Â Â Â Â Â When tightening the spring lever, the legs should be away from the front, and should stand on the side, and the anti-slip buckle will break the wound.
9, Â Â Â Â Â Â Â Â When preparing for shutdown, stop the mine first, and wait until all the ore remaining in the tiger's mouth is discharged before parking.
10. Â Â In the event of a sudden power outage, the start switch must be pulled down immediately and the residual ore in the tiger's mouth must be removed.
The integrated Nano Toothbrush mold produced by our company has the advantages of good matching, no flash, high quality, high output, simple operation, and convenience.
More than 23 YEARS experience in manufacturing Mould, die casting,stamping,CNC machining,extrusion and Plastic Injection Moulding parts.
Our Advantage:
1. We are a professional OEM manufacturer.
2. We have experienced engineers and quality control team as our strong backing.
3. High quality, competitive price, quick response is our mission.
4. Professional technical support
5. Good delivery time
6. Strict quality control process
7. Cost-Effective
8. Rich experience in mould design and production.
One-Body Nano Toothbrush Mould
Custom Plastic Injection Molding,Nano Toothbrush Plastic Molding,Abrasive Polishing Heat Treatment Mould,One-Body Nano Toothbrush Mould
Yangzhou Baotian Precision Mold Co, Ltd , https://www.jsbtmold.com